<legend id="ensms"><li id="ensms"></li></legend>

      <ruby id="ensms"></ruby><ol id="ensms"><code id="ensms"></code></ol>
      1. 產品展示



        • p753.jpg








        Service intended

        P753S series have diaphragm seal to be combined with a pressure gauge. These series are suitable to be used for the situation where corrosive, contaminated, hot, and viscous pressure mediums are present, and it could be used for a chemical, food, beverage, biochemical, and pharmaceutical industry.

        Special features 3-A certificated
        Suitable for SIP and CIP
        All stainless steel and welded construction
        Nominal diameter 63 and 100 mm
        Accuracy ±1.6 % of full scale
        If scale range less than 100 psi : ±2.0% of full scale
        Scale range 0 ~ 3.5 MPa, single
        Working pressure Steady pressure : 75 % of full scale value
        Fluctuating pressure : 67 % of full scale value
        Operating temperature Ambient : -20 ~ 65 °C
        Fluid : Max. 121 °C
        Temperature effect Accuracy at temperature above and below the reference temperature (20 ℃) will be effected by approximately
        ±0.5 % per 10 ℃ of full scale

        Standard features

        Process connection DIN Round thread 28-8
        Case and cover Stainless steel (304SS)
        Electropolished with pressure relief
        Window Safety glass
        Movement Stainless steel
        Dial White aluminium, with pointer stop pin
        With black/red lettering, dual pressure scale
        Pointer Black painted aluminium alloy
        Helium leak rate Tested to confirm leakage rates of less than 10-8 mbar •?/sec
        System filling Food grade oil (FDA certified)
        O-ring Supplied by FDA approved Supplier (Viton)
        Option Material of wetted parts : Electropolished 316L SS